Rock.Your.Mobile.Call.Recorder.Pro.v1.10

This useful application will let you record incoming and outgoing phonecalls. CallRecorder can start recording automatically or ask whether torecord a conversation or not - this will depend on the rules you set.
How to start:

1. First, you should turn CallRecorder on. To do this, press Optionsand select Settings command. In Settings dialog you can turnCallRecorder on and set up some options;
2. After that you should set rules for CallRecorder - considering theserules the application will or will not record phone calls;


Main view:

You can find all recorded phone conversations in the main view of CallRecorder. The following functions are available here:

* Play record. You can change the volume with joystick left/rightarrows while a record is being played. To change speaker from loud toquiet or vice versa set an option Play volume in Settings dialog to acorresponding value;
* Call a contact or a phone number. If the highlighted record has aphone number, you can dial it even without exiting CallRecorder - justpress Call button or select this command;
* Send via Infrared/Bluetooth/Email/MMS you can send the recorded conversation with the help of this command;
* View contact (hot key: '*') displays a dialog with a contact;
* Properties (hot key: '5') displays a dialog with record's detailed properties;
* Delete (hot key: 'C') deletes marked records;
* Delete all (hot key: 'Pen+C');
* Pack deletes all records that don't have a sound file
* Refresh actualizes the list of records;

Records that don't have a sound file are marked by red color

QUOTE:
       Transfer the file to your device and install.         
    Use "Appname Key" to generate your code.You may then remove it.
                            

这么快就更新了,支持!

希望汉话

支持哈

感谢分析～～～～

感谢分享

支持
感谢分享

一直想说，楼上的，你那头像里的人长的好象我前女友！还是特象！

以前的好像就是1.10

有beep声吗?

支持分享！

该软件可以允许你对打入或打出得电话进行录音。CallRecorder能自动或者询问是否进行录音——这主要根据你的设置。
开始：
1、首先你必须启动CallRecorder。按“Oprionsand”选项可以进行设定，可以打开CallRecorder，也可以进行其它的设置。
2、然后为CallRecorder设置规则——程序将根据这些设置来确实是否录音。
主界面：
你可以在CallRecorder主界面找到所有记录下来的对话。主要有以下功能:
* 播放录音。你可以通过摇杆的左/右来控制音量。你也可以在设置对话框中设置相应数值来改变音量。
* 被高亮显示的录音包含对方的电话号码，你可以不退出CallRecorder直接拨打这个电话——直接按拨打键或选择拨打命令。
* Send你可以利用该命令将电话录音通过红外线/蓝牙/Email/短信发送出去。
* View contact（快捷键：*）显示该联系人的对话框
* Properties（快捷键：5）显示录音的详细属性
* Delete（快捷键：C）删除被标记的录音
* Delete all（快捷键：Pen+C）删除收有录音
* 删除所有无声的录音文件
* 刷新录音列表
无声录音文件将被标记为红色
将该文件传送到你的手机上安装。适用“Appname Key”生成注册代码，然后你就可以删除它了


[ 本帖最后由 citveeli 于 2007-3-1 08:52 编辑 ]

最新更新，不错！！

This useful application will let you record incoming and outgoing phonecalls. CallRecorder can start recording automatically or ask whether torecord a conversation or not - this will depend on the rules you set.

该程序可对来电及去电录音。软件可自动开始电话录音或询问是否对该次对话录音 ----- 这取决于你所设定的规则

How to start:

1. First, you should turn CallRecorder on. To do this, press Optionsand select Settings command. In Settings dialog you can turnCallRecorder on and set up some options;

首先，应通过按“选项 Option”，选择“设置 Settings” 对话框来开启CallRecorder软件。在此对话框内可开启CallRecorder软件并设置其它的一些选项；

2. After that you should set rules for CallRecorder - considering theserules the application will or will not record phone calls;

然后应设置CallRecorder软件的规则 ----- 软件根据这些规则来确认是否对通话进行录音；

Main view:

主界面：

You can find all recorded phone conversations in the main view of CallRecorder. The following functions are available here:
你可以在CallRecorder软件的主界面内找到所有已录制的通话录音，此界面下可操作以下命令，

* Play record. You can change the volume with joystick left/rightarrows while a record is being played. To change speaker from loud toquiet or vice versa set an option Play volume in Settings dialog to acorresponding value;

*播放录音      播放录音时可通过摇杆向左/向右改变音量。在“设置 Settings" 对话框内选“播放音量 Play volume” 选项，选择“loud” 或“quiet”可对应的切换“发声”及“静音”模式

* Call a contact or a phone number. If the highlighted record has aphone number, you can dial it even without exiting CallRecorder - justpress Call button or select this command;

*呼叫某联系人或电话号码      可在不退出CallRecorder软件的情况下直接对高亮显示的录音条目所对应的号码拔号 ----- 只需按“拔号”键或选择此命令

* Send via Infrared/Bluetooth/Email/MMS you can send the recorded conversation with the help of this command;

*通过红外/蓝牙/电邮/短信方式发送     在此命令的帮助下发送已录制的对话
     
* View contact (hot key: '*') displays a dialog with a contact;

*显示联系人(热键：*)  显示联系人对话框

* Properties (hot key: '5') displays a dialog with record's detailed properties;

*属性(热键：5)   显示记录详细属性对话框

* Delete (hot key: 'C') deletes marked records;

*删除(热键：c)   删除标记的记录

* Delete all (hot key: 'Pen+C');

*删除所有记录(热键：笔形键+c)

* Pack deletes all records that don't have a sound file

*压缩      删除所有不包含语音文件的记录

* Refresh actualizes the list of records;

*刷新     更新记录列表

Records that don't have a sound file are marked by red color

不包含语音文件的记录标记为红色

QUOTE:
       Transfer the file to your device and install.         
    Use "Appname Key" to generate your code.You may then remove it.

将文件传送到你的手机并安装，打开“Appname key”程序获得注册码，然后可删除“Appname key”程序

                            

又碰上了，看来真是僧多肉少啊

感谢分享

这么快就更新了,支持!