21 2006-11-5 08:25
NDS模拟器 No$gba 2.3a发布 (新版开始支持声音模拟)
4th November 2006 - version 2.3a[quote]
- nds/help: nds-bitmaps can be wrapped (that unlike gba-bitmaps) (thanks remi)
- nds/video: emulates optional wrap-around (area overflow) for nds bitmap-modes
- nds/video: emulates read-only 2d-engine-b ports as read-only (thanks remi)
- nds/3d: texture transformation mode 1 supports negative m[8,9,12,13] values
- nds/3d/boxtest: fast onscreen pre_check on any of all 8 coordinates of box
- nds/3d/boxtest: fast offscreen pre_check on all 8 coordinates of whole-box
- nds/3d/boxtest: fast offscreen pre_check on all 4 coordinates of box-face
- video/speedup: faster bg drawing when special effects disabled (blend/bright)
- reg/home: moved all users to usa, avoids paypal-german-language-service (remi)
- reg/full: new parity and decrypt.jpg encryption by headless marching soldiers
- reg/full: discontinued free nds-updates for older (than 12 months) gba-users
- reg/full: registration tool auto-generates invoices for commercial users
- reg/home: new file-ext .key (some servers now declare .bin as potential virus)
- sync: forces machine_switch on retrace, forces to be 1st machine after retrace
- gui/f1_key: HELP_FORCEFILE instead HELP_CONTENTS (preserves current chapter)
- webpage: added donate buttons on gba,msx,cpc,nes,2k6,zx8,c64 freeware pages
- email: new email address - please do NOT put it online - due to spam problems
- nds/3d: bug-fixed GX "nop" command (to have 0 parameters, instead 1 parameter)
- emu/help: described + emulated gba/nds7 dummy cp14-icebreaker (prefetch data)
- nds/cpu: emulates cp15 ctrl bit15 (pre-v5 ldr/ldm/pop pc.bit0=thumb disabled)
- cpu: emulates/ignores misaligned r15 in LDM [Rb],r15 (with optional warning)
- nds/help: added some basic specs on DS Memory Timings (in DS Various chapter)
- nds/3d: bugfixed texture transform (imul_op=64bit, instead imul_eax,op=32bit)
- cpu: emulates empty rlist (load/store r15 on ARMv4, Rb=Rb+/-40h on ARMv4/v5)
- cpu: emulates writeback-base-included-in-rlist (for all stm/ldm/v4/v5/tmb/arm)
- cpu/help: added info on invalid rlist's for ARMv4/v5 THUMB/ARM LDM/STM opcodes
- cpu: bugfixed arm9 q(d)add/sub (xor 7fffffffh instead 7ffffffh, one more f)
- nds/sound: emulates sound output speaker routing and speaker stereo panning
- nds/sound: emulates sound-hold (freezes output until hold=0 or next re-start)
- nds/sound: optionally mono output, optionally disabled, on machine 1 only
- nds/sound: allows "dumb loops" when reading non-irq-timed sound status regs
- nds/sound/help: described hold flag (can't hold on restart, apparently bugged)
- nds/sound/help: described the two different ch(a)+ch(b) addition outputs
- nds/sound/help: described capture errors (both negative and overflow bugs)
- nds/sound: emulates minmax clipping, fully emulates all sound capture errors
- gba/sound: fixed small ch4 glitch (occured when only one stereo side was on)
- gba/sound: bugfix: recurses channel 3 wave ram bank number/bank size changes
- gba/sound: emulates minmax clipping, corrected channel-volume vs bias-volume
- gba/nds/sound/help: rev-engineered Max Output Levels (psg/pcmfifo/bias/clip)
- nds/sound: emulates capture (routing, adding, mixing, rounding, clipping, etc)
- nds/sound: emulates sound loop+length and high accuracy frequency timings
- nds/gba-slot/bugfix: memadr_sram (instead nnn=0Eh) (thanks Chow Kim Foong)
- nds/sound/help: corrected sample frequency, explained length/loop registers
- nds/sound: emulates channel volume, channel volume shift, master volume, bias
- nds/sound: emulates pcm8, pcm16, adpcm, psg wave/duty, psg noise formats
- nds/sound: emulates all write-only sound ports as such (reads as 00000000h)
- nds/sound/no$fmw/emu: initializes bias=200h (as done by original firmware)
- nds/sound: nds_sb_generate_sample invoked by NDS7 (not NDS9) as sound master
- nds/bugfix: fixed arm9 halfmul opcodes (accidently exchanged opcode lsbs/msbs)
- debug/disass: fixed smulxy opcode (showed up as "smmuxy" instead of "smulxy";)
- nds/sound/help: described SOUNDCNT bits 8-11 (final audio output selection)[/quote]
简单的使用方法：
- 上这里下载NDS ROM，然后用WINRAR把ROM解压出来
- 用eNDryptS Advanced v1.2还原为加密格式
- 然后执行NO$GBA模拟器运行刚才还原成加密格式的ROM
注意把ROM还原成加密格式的时：
- ROM和软件(eNDryptS Advanced v1.2)放同一目录，按照提示操作
- 只有还原成加密的ROM，才能让No$GBA读取，并运行
[size=6][color=red]本模拟器设置了解压密码：[/color][/size]
**** Hidden Message *****
[[i] 本帖最后由 21 于 2006-11-5 08:37 编辑 [/i]]
zhshd 2006-11-7 13:43
感谢分享~~
好像写速度还不是很好，而且有些游戏还是不支持。
期待下个版本的改进
月光S 2006-11-7 15:40
[quote]原帖由 [i]carttlew[/i] 于 2006-11-5 18:01 发表
不知道速度如何？ [/quote]
zprzpr163 2006-11-10 16:38
下来看看，谢谢楼住
lds0405 2006-11-11 15:59
好东西~~~~~~~！！！！！！！！！！！！B_support
yinweijml 2006-11-11 22:48
xihuan
yanyan0454 2006-11-12 10:01
4234
cokerush 2006-11-12 21:08
这么多都模拟，厉害啊
wangxiao120 2006-11-16 19:16
支持一下吧
不错的东西
andy438438 2006-11-17 20:13
这么好的东西一定要下下的
joyes5965 2006-11-18 17:52
支持21
85003241 2006-11-18 17:52
hao1!!!!!!!!!!!!11
pinekarl 2006-11-20 13:18
支持一下楼主！！！！
joyes5965 2006-11-20 19:35
支持21
123828315 2006-11-22 18:46
eNDryptS Advanced v1.2
eNDryptS Advanced v1.2
123828315 2006-11-22 18:46
eNDryptS Advanced v1.2
eNDryptS Advanced v1.2
xiaohecoo1 2006-11-22 20:54
顶、
顶~~~~~~~~~~~~~
32032046 2006-11-24 02:16
!!!!!!!!!!!!风！
panzifan 2006-11-25 00:40
支持啊找很久了
qxj159951 2006-11-25 17:04
封印解除，但是还要B_thanks
hhhhhiiiii 2006-11-26 00:26
速度如何啊？？
xiewuzhi 2006-11-26 15:54
支持，好！！！！！！！！！
hello55866 2006-11-27 14:49
hao