[软件] Locator 2.10 基站定位完全版

一款简单的可以通过GPS模块或者GPRS进行定位的工具
本软件CellGPS就是为此开发的。首先要求用户有GPS接收机，运行本软件之后，在你的周围多跑跑，软件就会自动搜集手机的位置和基站信息，并保存为一个文件。利用这些数据，编制相应的算法，就能够获得各个基站的具体位置。一个人的能力是有限的，当很多人参与进来，搜集足够多的数据汇总在一起进行计算，就能够得到相当准确的基站数据了。就可以提供给CPS类软件使用了。其精度虽然比不上GPS，但是与CPS相比，应该是大大提高了。

这个版本改名了.开始换名叫Locator

CellGPS sends the location of the mobile phone to a webserver (gsm cell identifier or GPS information).
It connects automatically to the server using a predefined Internet connection, at predefined time periods.
A Bluetooth-capable or internal GPS device is required if you want to send GPS information (e.g. EMTEC Bluetooth GPS, or Fortuna Bluetooth GPS, etc.).

How to set it up:

Connection period: it shows the frequency of the connection (in seconds).
URI: set the page of the server to be called.
Connection: select amoung the available GPRS connections (set up in Menu/Tools/Settings/), e.g. you can select a Internet connection.
Upload: shows the information being uploaded to the server.
  Cell ID: uploads the gsm cell id.
  GPS data: latitude, longitude, direction, speed information. It connects only if the GPS data is valid.

How to connect to the GPS device:

A Bluetooth-capable or internal GPS device is required. In Settings, switch to upload GPS data, and restart the program.
At the first time, the scan for Bluetooth devices starts. After selecting the appropiate device, the phone connects to it, and begins to receive location information. If the device is not paired, then it will ask for the Bluetooth code.
After the first time, the phone will automatically look for this GPS device. No matter if the device goes out of range, it will connect to it again automatically.
The received location information is displayed below the cell id and signal strength. It is displayed with red when the information is not valid (the GPS device is not in range, or the current location is not determinable).

感谢分享！
支持一个！